Definition: NURBS (Non-Uniform Rational B-Splines) are a mathematical method that CAD systems use to describe curves and freeform surfaces exactly. Instead of building a surface from many small faces, NURBS stores a formula with control points. Thus a bore stays a perfect circle, no matter how close you zoom in.

English: Non-Uniform Rational B-Splines (NURBS)
German: nicht-uniforme rationale B-Splines, NURBS-Flächen

How It Works

Three things define a NURBS curve:

  • Control points that "pull" the curve, but do not have to lie on it,
  • Weights that set how strongly a control point pulls (the "rational" in the name; with them, you can show circles and conic sections exactly),
  • A knot vector that sets which control point affects which section of the curve (the "non-uniform").

A NURBS surface applies this principle in two directions. Solids in CAD consist of many such surfaces that are connected at their edges (boundary representation). Exchange formats such as STEP (ISO 10303) and IGES transfer this exact geometry between CAD systems.

Why tessellation is necessary: In real time, GPUs draw only triangles. For real-time rendering in the browser, an app, AR or VR, each NURBS surface must therefore be converted into a triangle mesh. For this, you set a tolerance: how far can the mesh deviate from the exact surface? Fine tolerances give smooth curves, but very many triangles. Coarse tolerances give small files, but visible edges on shafts or bores. Real-time formats such as glTF 2.0 or OBJ contain only the triangle mesh, no NURBS.

Importance in Mechanical Engineering

  • Design and manufacturing: The exact NURBS data stays the reference for CAM, metrology and tolerances.
  • Sales and trade shows: For web viewers, kiosks or AR presentations, the model is tessellated and simplified. This is the core of the CAD-to-3D conversion.
  • Tolerance per part: Visible housing parts get a fine tessellation, hidden internal parts a coarse one. This saves data volume without making the visual quality worse.
  • Protection of know-how: A tessellated 3D model contains no exact design geometry and is therefore better for sharing than the original CAD file.

Frequently Asked Questions (FAQ)

Can you convert a triangle mesh back into NURBS?

Only approximately. The exact surfaces and the design history are lost during tessellation. New NURBS surfaces come only from time-consuming surface reconstruction, as in reverse engineering.

Why do curves sometimes look angular in the 3D viewer?

The tessellation tolerance was too coarse. A finer tolerance or smoothed normals usually fix this.