Definition: XR training is the training of employees and customers with extended reality technologies: virtual reality, augmented reality and mixed reality. Participants practice tasks, procedures and behavior on virtual machines or on the real machine with overlaid instructions. Errors have no consequences, you can repeat procedures as often as necessary, and the learning progress is measurable.
In B2B mechanical engineering, XR training is used mainly for: operator training before and after delivery, service and maintenance training, safety instruction, onboarding of new employees and dealer training.
Advantage: Training takes place on the machine, even when it is not built yet, is already at the customer site or is currently in production.
English: XR Training, Immersive Training, VR/AR Training
German: XR-Training, XR-Schulung, immersive Schulung
How It Works
Three forms, one model
| Form | What participants see | Typical use |
|---|---|---|
| VR training | A fully virtual machine in a virtual environment | Operation, fault scenarios, dangerous situations |
| AR training | Instructions and 3D content on the real machine (tablet, smartphone, glasses) | Maintenance, setup, on-site instruction |
| MR training | Virtual components in the real room, often through passthrough in the headset | Assembly, space requirements, team training |
All forms use the same 3D model of the machine. Logic is added to it: Which switches can you operate? Which parts can you remove? What happens when an error occurs? The training guides step by step, checks each action and gives feedback.
Sequence of a training session
- Introduction in a calm scene: controls, comfort, goal of the exercise
- Guided run with instructions
- Free run without help
- Test mode: errors, time and order are recorded
- Evaluation for participants and trainers
The content itself is created as VR content and distributed to the devices through a VR platform.
B2B Applications
Operator training on the virtual machine
A special-purpose machine takes months until delivery. With XR training, the customer's operating personnel learn the machine before that: control panel, setup procedures, material changes, emergency stop. At commissioning, they already know the basics, and the commissioning team uses its time on site for the details. Later, the training stays available for new employees and shift changes, without stopping the machine in production. For the manufacturer, training thus becomes part of the scope of delivery: you can ship it with each machine, offer it in several languages and update it centrally when the software or the design changes.
Service and maintenance training
Service technicians practice maintenance steps, troubleshooting and the replacement of wear parts on the virtual assembly. You can trigger rare faults on purpose that are almost impossible to train on the real machine. AR instructions then support the technician during the real job. This is especially valuable for service teams and partners all over the world who cannot travel to the main plant for each new product series.
Safety training
Participants can practice dangerous situations without danger: work in the hazard zone, lockout/tagout, behavior during faults. They experience the results of an error without injury. XR training adds to the mandatory safety instruction and the operating manual, but it does not replace them.
Sales, trade shows and dealer training
Dealers and sales partners learn new machines before a demo unit is available. At the booth, a short training sequence becomes a product demonstration: visitors operate the machine themselves.
Design review
Training scenarios show weaknesses in the design: Can you reach the filter? Can the operator see the display? If you ask these questions on the virtual prototype, changes are still inexpensive.
Measuring Learning Success
What is recorded
XR training produces detailed data: completed steps, errors, help requests, duration, order and, if required, gaze data from eye tracking. This data shows which steps cause problems and where the content needs improvement.
xAPI as the standard
The Experience API (xAPI) has become the standard for the exchange of this data. It describes learning events as statements with the pattern "who – did what – with what" and stores them in a Learning Record Store (LRS). Since 2023, xAPI 2.0 has been a standard as IEEE 9274.1.1-2023. The cmi5 specification defines how a learning management system (LMS) starts xAPI content and receives its results. This way, results from the headset go into the same training record as e-learning and classroom courses.
Limits of measurement
Training data shows whether a person can do the procedure in the simulation. You should also check whether the learning transfers to the real machine, for example with a practical test. Movement and gaze data is personal data: clarify the purpose, the retention period and access in advance, also with the works council (see data privacy).
Introduction in the Company
Content from CAD data
Design data is too detailed for real time. It is reduced, given materials and supplemented with movements, see CAD-to-3D conversion. Design secrets stay protected when only the optimized model leaves the company. If you set up the preparation as a fixed 3D pipeline, you can update training quickly when the design changes.
Devices and management
Standalone VR headsets, AR glasses, tablets and desktop PCs have different requirements. A training that runs on several device classes is a good choice, so that participants without a headset can use the same content on a tablet or in the browser. Larger device fleets are managed centrally with mobile device management: distribute content, control updates, lock devices in kiosk mode. When you select devices, look at how long the manufacturer gives support. Meta, for example, stopped selling its business management service Horizon managed services in February 2026 and guarantees support to existing customers until January 2030.
Comfort and acceptance
Many participants use VR for the first time. Teleportation instead of smooth movement, stable frame rates, short sessions and a seated version help prevent motion sickness. Hygiene (replaceable face cushions), people who wear glasses and the adjustment of the headset belong in every plan.
Frequently Asked Questions (FAQ)
Does XR training replace in-person training at the machine?
No, it adds to it. XR training moves basics, repetitions and dangerous scenarios into the virtual world. The practical instruction at the real machine and the legally required safety instructions are still necessary.
VR or AR – which is better?
That depends on the goal. VR is a good choice when the machine is not available or when you want to simulate hazards. AR is a good choice when people work on the real machine and instructions directly on the component help. Many programs combine both.
How long does an XR training session take?
Short modules that you can complete one at a time have proven effective. Beginners especially should start with short sessions and plan breaks.
Can you connect XR training to an existing LMS?
Usually yes, if the training supports xAPI and the LMS has or connects to a Learning Record Store. With cmi5, the LMS starts the training and receives the results. Older systems that understand only SCORM often need an intermediate solution.
How much does it cost to create an XR training?
That depends on the scope, the depth of interaction and the quality of the available CAD data. If good 3D data is available and you use one model for several trainings and channels, the effort per training decreases significantly.
Industry Standards and Technologies
- IEEE 9274.1.1-2023 (xAPI 2.0) – standard for learning data
- xAPI specification (ADL, GitHub) – open specification of the Advanced Distributed Learning Initiative
- cmi5 specification (GitHub) – connection of xAPI content to an LMS
- Khronos OpenXR – open standard for XR applications
- W3C WebXR Device API – VR and AR in the browser
- ISO 9241-394:2020 – ergonomics to reduce visually induced motion sickness
Related Topics
XR technologies: - Extended reality (XR) – umbrella term for AR, VR and MR - Virtual reality – a fully virtual environment - Augmented reality – digital content in a real environment - Mixed reality – combination of real and virtual - Passthrough camera – the real environment in the headset
Content and platforms: - VR content – creating content for VR - VR platform – distributing and managing content - Virtual environment – training rooms in 3D - CAD-to-3D conversion – preparing design data - Digital twin – digital image of the plant
Operation: - Mobile device management – managing device fleets - Motion sickness – comfort in VR - Data privacy – handling training data - Data security – protection of CAD and learning data - VR controllers – input during training
